Printing Stored Documents - Lanier LD225 Fax Manual

Other Transmission Features
Specifying documents by file
name
A Select [Search by File Name].
B Enter the name of the document
4
to be sent, and then press [OK].
Note
❒ Partial matching is used when
searching for a file name.
C Select the file to be sent.
D
If you select a document with a pass-
word, enter the password, and then
press [OK].
If the document does not have a
password, proceed to step
70
E
When you want to add your originals
to stored documents and send
them all at once, press [ROrigi. +
Stored File] or [Stored file + R Origi.].
When sending only stored docu-
ments, proceed to step
Note
❒ When [ROrigi. + Stored File] is
pressed, the machine sends the
originals, and then stored files.
When [Stored file + R Origi.] is
pressed, the machine sends the
stored files, and then originals.
❒ The added originals are not stored.
F
Press [OK] twice.
Note
❒ To add an original to stored docu-
ments, place the original, and then
select any scan settings you require.
G
Specify the destination, and then
press the {Start} key.

Printing stored documents

Use this function to print documents
stored in the Document Server.
Note
❒ Only documents stored using the
facsimile function can be printed.
❒ You can also print the first page only
E
.
to check the content of the original.
❒ You can specify and print multiple
documents, a maximum of 30 doc-
uments at one time.
F
.