Administrator Setting; Administrator Tools List - Lanier LD225 Fax Manual

9. Administrator Setting

Administrator Tools List

You can program, change, or delete standard messages and auto documents.
You can also set the line type for the machine connection, program various IDs
(including a Polling ID), fax destinations, and many other items. In addition, you
can check the number of documents transmitted and received.
Function name
Program / Change / Delete
Standard Message
Store / Change / Delete Auto
Document
Program / Change / Delete
Scan Size
Print Journal
Transmission Page Count
Forwarding
Memory Lock RX
ECM
Parameter Setting
Program Special Sender
Description
You can program, change, or
delete standard messages
printed at the top of the first
page of each incoming docu-
ment.
You can program, change, or
delete pages stored as auto
documents.
You can program, change, or
cancel frequently used scan
sizes.
Prints a Journal.
Checks the transmission and
reception, and totals on the
display.
Transfers received documents
to a programmed receiver
(forwarding destination).
Switches the Memory Lock on
or off. To use it, program an
ID for printing a document re-
ceived in Memory Lock mode.
If part of the transmission fails
due to a telephone line fault,
this function resends the
failed part automatically.
Allows you to change and
print the function settings to
meet your needs.
By programming particular
receivers as Special Sender in
advance, you can have Special
Senders treated differently.
Reference
p.157 "Programming, Chang-
ing, and Deleting Standard
Messages"
p.158 "Storing, Changing, and
Deleting an Auto Document"
p.160 "Programming, Chang-
ing and Deleting a Scan Size"
p.162 "Printing Journal"
p.162 "Counters"
p.162 "Forwarding"
p.165 "Memory Lock"
p.166 "ECM (Error Correction
Mode)"
p.167 "User Parameters"
p.175 "Programming/Chang-
ing Special Senders"
155