Quitting The Forwarding Function - Lanier LD225 Fax Manual

Administrator Setting
F
Specify an End Receiver using the
destination list, and then press [OK].
The receiver name is shown to the
right of [Receiver].
Note
❒ Press the button on the right of
the display to switch the desti-
nation between fax number, e-
mail address, IP-Fax destina-
tion, and folder.
❒ Set a folder destination in Address
Book Management under Ad-
ministrator Tools in the System
Settings menu. See "Registering
Folders", General Settings Guide.
❒ If you have specified a folder for
forwarding, you can specify the
file format used for forwarding.
See p.167 "User Parameters"
(switch 21, bit 3).
9
❒ If you make a mistake, press
[Clear] before pressing [OK], and
then try again.
G
Press [OK].
H
Press the {User Tools/Counter} key.
The standby display appears.
164

Quitting the forwarding function

A
Press the {User Tools/Counter} key.
B
Press [Facsimile Features].
C
Press [Administrator Tools].
D
Press [Forwarding].
E
Press [Off], and then press [OK].
F
Press the {User Tools/Counter} key.
The standby display appears.