Registering Or Changing A Gateway - Lanier LD225 Fax Manual

Facsimile Features
C
Enter the IP address and SIP user
name, and then press [OK].
The screen returns to that of step
D
Press [OK].

Registering or changing a gateway

A
Press [Program / Change / Delete Gate-
way].
8
B
Check that [Program / Change] is se-
lected.
C
Press a gateway to register.
When registering a new gateway,
press [*Not Programmed].
152
D
Press [Change] for [Prefix].
B
.
E
Enter the Prefix using the number
keys, and then press [OK].
Note
❒ To change the existing prefix, press
[Clear], and then enter a new pre-
fix.
❒ For documents sent using a gate-
way to G3 Fax, prefixes can be
used. If the first several digits of
IP-Fax number and the gate-
way-specific prefix are identical,
documents can be transmitted
using the registered digits of the
gateway. For example, if both
03 and 04 have been registered
a s g a t e w a y n u m b e r w h i l e
0312345678 is also specified,
documents can be transmitted
via a gateway for which 03 is
used as a prefix.
❒ When you wish to use the gate-
ways regardless of the IP-Fax
destination numbers, register
only the gateway addresses with-
out registering the prefix.