General Settings/Adjustment - Lanier LD225 Fax Manual

General Settings/Adjustment

❖ Memory / Immed. Transmission Switch
Use this function to specify the
Transmission Mode for document
transmission.
• Memory Transmission
• Immediate Transmission
❖ Text Size Priority
Use this function to specify the
character size of your originals for
scanning.
• Standard
• Detail
• Super Fine (expansion memory
required)
❖ Original Type Priority
Use this function to specify the
type of originals for scanning.
• Text
• Text / Photo
• Photo
❖ Auto Image Density
Use this function to prioritize auto-
matic Image Density for scanning
your originals.
• On
• Off
❖ Adjust Scan Density
Use this function to specify the
scan density of your originals.
❖ Select Title
Use this function for selecting the
title to be shown on the destination
list.
• Title 1
• Title 2
• Title 3
Accessing User Tools (Facsimile Features)
❖ Change Initial Mode
Use this function to select whether
contents registered in program
No.1 are to be used as the initial
settings after the power is turned
on or the {Clear Modes} key is pressed:
• Standard
• Program No.1
Note
❒ You cannot select Program
No.1 if program No.1 has not
been programmed with pri-
ority functions.
❖ Adjust Sound Volume
Use this function to adjust the
sound volume during On Hook
Mode and Immediate Transmis-
sion.
See p.91 "Adjusting the Volume",
Facsimile Reference <Basic Features>.
• On Hook Mode
• At Transmission
• At Reception
• At Dialing
• At Printing
❖ Program Fax Information
See p.83 "Initial Settings and Ad-
justments", Facsimile Reference <Ba-
sic Features>.
• Fax Header
• Own Name
• Own Fax Number
❖ Scan End Reset
Use this function to return to the
initial settings each time an origi-
nal is scanned.
• On
• Off
8
145