Standard Message Stamp - Lanier LD225 Fax Manual

F
Specify the transmission mode from
[2 Sided from 1st Page] or [1 Sided for
1st Page], and then press [OK].
The selected original position and
page opening orientation are shown
above the highlighted [2 Sided Orig-
inal].
Note
❒ To cancel this mode, press [Can-
cel]. The display returns to that
C
of step .
❒ Select [2 Sided from 1st Page] to
send a two-sided original from
the first page.
❒ Select [1 Sided for 1st Page] if you
want to send a cover letter as the
first page.
G
Press [OK].
H
Specify the destination, and then
press the {Start} key.

Standard Message Stamp

Use this function to stamp a standard
message at the top of the first original
sent.
There are four types of standard mes-
sages: "Confidential", "Urgent",
"Please phone.", and "Copy to corres.
section"
You can also program other messages.
Note
❒ While this function is in use, the
third line of the Label Insertion is
not printed. See p.74 "Label Inser-
tion".
❒ When there is an image around the
area where the standard message
is to be stamped, that image is de-
leted.
❒ To program a standard message, use
the Program / Change / Delete
Standard Message function. See
p.157 "Programming, Changing,
and Deleting Standard Messages".
A
Place the originals, and then select
the scan settings you require.
Reference
p.15 "Placing Originals", Fac-
simile Reference <Basic Features>
p.34 "Scan Settings", Facsimile
Reference <Basic Features>
B
Press [Sub TX Mode].
C
Press [Std. Message].
Sub Transmission Mode
4
65