Ip-Fax Settings - Lanier LD225 Fax Manual

Facsimile Features

IP-Fax Settings

Make settings to use IP-Fax.
Set H.323 for the gatekeeper, SIP for
SIP server, and gateway for gateway
access if necessary. Check the settings
of the network to which this machine
is connected before making settings.
Note
❒ The following characters can be
used for registration of the alias
telephone number in H.323 Set-
ting. Make sure you enter these
characters correctly:
• Numbers
• Symbols (# and *)
❒ The following characters can be
used for registration of the SIP
User Name in SIP Settings. Make
sure you enter these characters
correctly:
• Alphanumeric symbols (lower
and upper cases)
• The 21 symbols in the following
8
table.
;
+
.
'
@
❒ Use numbers and periods (".") to
enter the correct IP addresses for
the gatekeeper, SIP server, and
gateway. You can get the correct IP
addresses from the network ad-
ministrator.
❖ Enable H.323
Specify whether or not H.323 is
used for IP-Fax transmission.
• On
• Off
150
? : & =
$ , - _
! ~ * #
( ) % /
❖ Enable SIP
Specify whether or not SIP is used
for IP-Fax transmission.
• On
• Off
❖ H.323 Settings
Set the IP address and alias tele-
phone number of the gatekeeper.
For details, see p.151 "Configuring
the H.323 gatekeeper".
• Gatekeeper Address (Main)
• Gatekeeper Address (Sub)
• Own Fax No.
❖ SIP Settings
Set the SIP server's IP address and
SIP user name. For details, see
p.151 "Configuring the SIP serv-
er".
• Proxy Server Addr. (Main)
• Proxy Server Address (Sub)
• Redirect Svr. Addr. (Main)
• Redirect Svr. Addr. (Sub)
• Registrar Address (Main)
• Registrar Address (Sub)
• SIP User Name
❖ Program / Change / Delete Gateway
Register, change, or delete the gate-
way used for transmission to IP-
Fax. For details, see p.152 "Regis-
tering or changing a gateway" and
p.153 "Deleting a gateway".
• Program / Change (Prefix, Se-
lect Protocol, Gateway Address)
• Delete