Memory Reception - Lanier LD225 Fax Manual

Reception Features

Memory Reception

The machine waits until all pages of
the document have been received into
memory before printing it.
This method is used with the follow-
5
ing functions:
• Combine 2 originals
See p.100 "Combine Two Origi-
nals".
• Multi-copy when set to multiple copies
See p.99 "Multi-Copy Reception".
• Reverse Order Printing
See p.102 "Reverse Order Print-
ing".
• 2 sided printing (optional)
See p.98 "Two-Sided Printing".
Important
❒ About one hour after the machine
is turned off, all fax documents
stored in memory are lost. If any
documents are lost in this way, a
Power Failure Report is automati-
cally printed when the operation
switch is turned on. Use this report
to identify lost documents.
❒ The machine may not be able to re-
ceive large numbers of documents
or documents with high data con-
tent. In such cases, it is recom-
mended that you switch off the
above functions or install the op-
tional expansion memory.
84
Limitation
❒ The machine may not be able to re-
ceive fax documents when free
memory space is low.
Note
❒ If the free memory space reaches
0% during Memory Reception, the
machine can no longer receive the
current fax document and stops
communicating.
❒ If you have selected Store for Re-
ception File Setting, received docu-
ment is saved on the hard disk and
will not be printed. You can print
those documents by operating the
machine or a connected computer,
as necessary. See p.195 "Storing or
Printing Received Documents".