Lanier LD225 Fax Manual page 189

F
Select the function you want to
program.
Note
❒ In this feature, "Authorized RX"
has the same settings as "Recep-
tion Settings". See p.147 "Re-
ception Settings".
Programming Authorized RX and
Special RX Function
A Select [Authorized RX] or [Special
RX Function].
B Select [On] or [Off], and then press
[OK].
The illustration shows the "Au-
thorized RX" display as an ex-
ample.
Using Administrator Settings
Programming Bypass Tray Paper
Size
A Press [Bypass Tray Paper Size].
You can select a size from [Auto
Detect], [Standard Size], or [Cus-
tom Size].
If you select [Auto Detect], pro-
ceed to steps B and G.
If you select [Standard Size], pro-
ceed to steps B, C, and G.
If you select [Custom Size], pro-
ceed to steps B , and D to G.
B Select the size you want to pro-
gram.
Note
❒ If you select [Auto Detect], the
machine recognizes the pa-
per size automatically.
• The machine will detect
the paper size for the by-
pass tray as the short edge
of the paper is inserted
into the machine. Even if
you place an A4 size sheet
in theK orientation, the
machine will detect it as
A3L.
❒ If you select [Standard Size],
select a paper size displayed,
and then proceed to step G.
❒ If you select [Custom Size], pro-
ceed to step D.
C Select the size you want to pro-
gram from the sizes shown.
9
179