Panel Description - Roland V-Card VC-1 Owner's Manual

Panel Description

When using the VariOS with the VC-1, the actual functions of the VariOS's buttons and knobs may not
correspond to the functions ascribed to these controls on the VariOS's panel. Here is a description of the
names and functions in each section of the VariOS when it is used with the VC-1. Please read this material
together with "Names of Things and What They Do" in the VariOS User Guide. Controls whose functions
do not match what is shown on the panel are indicated with a
Front Panel
fig.12-01(VariosFront)
1
1
PC CARD Slot
The VC-1 can be inserted here.
2
C1/C2/C3 Knobs
Display
C1 (PITCH)
C2 (TIME)
C3 (FORMANT)
3
Indicators
Display
MIDI
TEMPO
PC
USB
4
Display
Various information is shown here according to the operations you perform.
* The explanations in this manual include illustrations that depict what should typically be shown by the display.
Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g., includes newer
sounds), so what you actually see in the display may not always match what appears in the manual.
90
2 3
Functions
The volume balance of the Upper and the Lower Tone can be change.
This sets the volume of the reverb and direct sounds.
This sets the portamento time from one note to another. If Portamento Switch (p. 99) is set to
OFF, C3 knob may have no effect.
Functions
Lights when a MIDI message is received.
This does NOT function for VC-1.
Lights when the MIDI mode of the VariOS is "PC" (p. 119).
Lights when connected to a computer via USB.
mark.
5 6
4
7
8 9 10 11