Roland V-Card VC-1 Owner's Manual page 11

4
TIME TRIP PAD
By touching the pad surface with your finger you can apply a variety of effects to the sound.
* The Time Trip effect is not applied.
Display
Indicator
[TIME TRIP]
[ASSIGNABLE]
[HOLD]
5
V-LINK
Not used with the VC-1.
6
ASSIGNABLE CONTROL
You can use them to modify the sound in realtime.
Display Function
[C1]
Adjusts the Aftertouch Sens (p. 79).
These can be assigned a variety of D-50 different functions, allowing you to change the tone
[C2]
in real time. (p. 22)
7
ARPEGGIO
You can use them to modify the sound in realtime.
* The Arpeggiator is not available for use.
Display Function
[TEMPO]
Adjusts the Chase time (p. 31) or the Portamento time (p. 28).
[ON/OFF]
Switches the Chase function on/off.
[HOLD]
Switches the Portamento function on/off.
8
KEYBOARD
Here you can change the pitch range of the keyboard.
Display
[TRANSPOSE]
[-OCT], [+OCT]
* Changes you make the KEYBOARD settings are only temporary—they will be discarded as soon as the power is
turned off. If you want you keep any changes you've made, you must save them in the VC-1. ("How to Make the
System Function Settings" (p. 78))
Function
This will light when you touch the Time Trip Pad.
This switches the Time Trip Pad on and off. The effect being controlled switches
according to the buttons pressed. (p. 19)
Switches hold on/off for the effect controlled by the Time Trip pad.
Function
Modifies the pitch range of the keyboard in semitone steps (-12 – +12 semitones).
Set the desired amount of transposition by holding down [TRANSPOSE] and
pressing [+OCT] or [-OCT].
Pressing [+OCT] or [-OCT] transposes the pitch of the keyboard in 1 octave units (-
3 – +3 octaves).
Panel Descriptions
11