Copying Parameter Settings - Roland V-Card VC-1 Owner's Manual

Creating a Patch

Copying Parameter Settings

A group of Tone parameters can be copied within a Patch (Parameter Copy).
fig.08-06a(LCD_Pulldown_ParamCopy)
1.
Make sure the PATCH TOP screen is displayed.
2.
Touch <
appears.
3.
In the pulldown menu, touch <PARAM COPY>. The PARAM
COPY window appears.
fig.08-06b(LCD_ParamParamWindow)
4.
Touch some button (valuebox) in the left side of the screen to
select the object you want to copy.
TONE (Source Tone)
Select the Tone to be copied.
Value: UPPER, LOWER
PARTIAL (Source Partial)
Select the Partial parameter to be copied.
Value: ALL, COMMON, PART-1, PART-2
Display
<ALL>
<COMMON>
<PART-1>
<PART-2>
BLOCK (Source Block)
If either PART-1 or PART-2 is selected in
Value: ALL, WG, TVF, TVA
Display
<ALL>
<WG>
<TVF>
<TVA>
5.
Touch some button (valuebox) in the right side of the screen to select the destination Tone.
TONE (Destination Tone)
Select the location for the Source Tone.
Value: UPPER, LOWER
54
> in the upper right of the screen. A pulldown menu
Function
All the parameters
Common parameters
Partial 1's parameters
Partial 2's parameters
Function
All parameters
WG parameters (p. 64)
TVF parameters (p. 68)
TVA parameters (p. 73)
1
2
3
, any of the following Blocks can be selected.
4
5