Roland V-Card VC-1 Owner's Manual page 62

Tone Parameters
fig.09-18e(EQ_Hf/HQ)
HiFreq (High Frequency)
Sets the frequency where the gain is altered in the middle to high
range.
Value: 250, 300, 350, 420, 500, 600, 700, 840 Hz, 1.0, 1.2,\r1.4, 1.7,
2.0, 2.4, 2.8, 3.4, 4.0, 4.8, 5.7, 6.7, 8.0, 9.5 kHz
HiQ (High Q)
Sets the width of the frequency band where the gain is boosted or
cut. With a higher value, the frequency band is narrower, and vice
versa.
Value: 0.3, 0.5, 0.7, 1.5, 2.0, 3.0, 4.2, 6.0
fig.09-19e(EQ_Hg)
HiGain (High Gain)
Sets the gain of the Hf frequency. "+" settings raise the gain and "-
" settings lower it.
Value: -12–+12 dB
fig.09-20(LCD_ChorusEdit)
Chorus Edit
Type (Chorus Type)
Selects one of the 8 basic chorus effects.
Value: 1–8
Display
1
2
3
4
5
6
7
8
Rate (Chorus Rate)
Sets the rate of the chorus effect. Higher values quicken the rate.
Value: 0–100
Depth (Chorus Depth)
Sets the depth of the chorus effect. Higher values deepen the effect.
Value: 0–100
62
Type
Chorus 1
Chorus 2
Flanger 1
Flanger 2
Feedback Chorus
Tremolo
Chorus Tremolo
Dimension
Level 0
HiFreq
HiFreq
Level 0
HQ is Height.
HQ is low.
Frequency
HiGain
Frequency