Table of Contents
Advertisement
Panel Descriptions
fig.02-01a(FrontPanel10–17)
17
9
PATCH PALETTE
Here you can recall patches.
Display
[NUMBER] (1–8)
[BANK]
[PATCH ASSIGN]
10
Display
This displays information regarding the operation you are performing.
* The explanations in this manual include illustrations that depict what should typically be shown by the display.
Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g., includes newer
sounds), so what you actually see in the display may not always match what appears in the manual.
11
Dial and buttons
Display
VALUE Dial
[DEC/-], [INC/+]
[
], [
[MODE]
[SHIFT]
[EXIT]
12
Function
These buttons let you select patches.
You can change the Patch Palette bank by holding down this button and pressing
[NUMBER] (1–8)
Not used with the VC-1.
Function
This is used to modify values. If you hold down [SHIFT] as you turn
the VALUE dial, the value will change in greater increments.
This is used to modify values. If you keep on holding down one button
while pressing the other, the value change accelerates. If you press one
of these buttons while holding down [SHIFT], the value will change in
bigger increments. (p. 51)
Moves the cursor location up/down/left/right. (p. 51)
], [
], [
]
Opens the Mode Menu window.
This button is used in conjunction with other buttons to execute
various functions.
Return to the PATCH TOP screen, or close the currently open window.
In some screens, this causes the currently executing function to be
aborted.
10
11
9
12
13
14
15
16
Advertisement
Table of Contents
