Panel Descriptions - Roland MV-8800 User Manual

Panel Descriptions

The illustration shows the MV-8800 rear panel when the separately sold MV8-OP1 option is installed.
The jacks shown in items 1–3 are available if the MV8-OP1 AUDIO I/O EXPANSION (separately sold) is installed.
You can make output settings from the INSTRUMENTS screen (Screen Guide; p. 114) and the PARTIAL EDIT screen
(Screen Guide; p. 125).
DIGITAL IN Connectors
These are digital audio input connectors. "A" is a coaxial type connector, and "B" is an optical type connector.
R-BUS Connector
This is a digital 2-channel input/8-channel output connector. You can also set the input select setting to receive audio
input from R-BUS channels 1 and 2, or use the R-BUS channels 1–8 to output the audio from the MULTI OUTPUT bus.
ANALOG MULTI OUTPUT Connectors
These jacks output the audio from the MULTI OUTPUT bus.
3
MV-8800 Using the MV8-OP1