Roland V-Card VC-1 Owner's Manual page 105

fig.04-05d
6-3.
Turn the VariOS's [VALUE] knob to select "Exclusive
Sw," and press the [VALUE] knob.
6-4.
Turn the VariOS's [VALUE] knob to specify On.
fig.12-24
7.
Press the VariOS's [MENU] button so it's lighted, and access the
MENU screen.
8.
Turn the VariOS's [VALUE] knob to select "Utility," and press the
[VALUE] knob.
fig.12-28
9.
Turn the VariOS's [VALUE] knob to select "Bank Dump," and
press the [VALUE] knob.
10. Turn the VariOS's [VALUE] knob to specify the save-source Patch
Bank.
fig.12-29
Select Bank
Selects the Patch Bank in the VC-1 with the patch data to transfer
to the D-50.
Value: I1 – I8, P1 – P6
fig.12-29a
11. Press the [VALUE] knob, and the display will ask "Are You Sure?"
Press [VALUE] knob once again to carry out the bank dump
operation.
12. When the data transfer is completed, the D-50's display shows
"Complete."
13. Press the [EXIT] button on the D-50 to return to the play mode.
Using the D-550
1.
Use a MIDI cable to connect the VariOS's MIDI OUT connector to the D-550's MIDI IN connector.
2.
Set the D-550 and VariOS to the same MIDI channel (the basic channel; p. 117).
3.
Turn the MIDI Mode of the VariOS to Internal (p. 119).
Transferring Patches To and From the D-50/550
4-2 4-2 4-1 4-2
5-2 5-3
5-1
5-2
105