Copying A Patch Bank - Roland V-Card VC-1 Owner's Manual

Creating Patches

Copying a Patch Bank

This procedure transfers the patch data saved in one of the VC-1's Patch banks (Int1 – Int8 or Pre1 – Pre6)
to another (Int1 – Int8).
fig.12-24
1.
Press the [MENU] button so it's lighted, and access the MENU
screen.
2.
Turn the [VALUE] knob to select "Utility," and press the [VALUE]
knob.
fig.12-25
3.
Turn the [VALUE] knob to select "Bank Copy," and press the
[VALUE] knob.
4.
Turn the VariOS's [VALUE] knob to specify the copy-source Patch
Bank, and press the [VALUE] knob.
fig.12-26
Source Bank
Specify the copy-source Patch Bank
Value: I1 – I8, P1 – P6
5.
Turn the [VALUE] knob to specify the copy-destination Patch
Bank, and press the [VALUE] knob.
fig.12-27
Destination Bank
Specify the copy-destination Patch Bank
Value: I1 – I8
fig.12-27a
6.
Press the [VALUE] knob, and the display will ask "Are You Sure?"
Press [VALUE] knob once again to carry out the bank copy
operation.
When the operation is completed, the display will indicate
"Completed!"
116