Setting The Midi Receive Channel; Selecting Patches With The Value Knob - Roland V-Card VC-1 Owner's Manual

5.
Press the [MENU] button to turn off its illumination.
* The "PC indicator" on the front panel of the VariOS shows the current MIDI Mode status. When this is lit, "PC"
mode is selected. When dark, "Internal" mode is selected.

Setting the MIDI Receive Channel

The VariOS will receive Note-on and Control change messages on the channel you specify here. If
you've connected a MIDI keyboard, set this channel to match the transmit channel of your MIDI
keyboard.
fig.12-11
1.
Press the [MENU] button so it's lighted, and access the MENU
screen.
2.
Turn the [VALUE] knob to select "MIDI Setting," and press the
[VALUE] knob.
fig.12-12
3.
Turn the [VALUE] knob to select "MIDI CH," and press the
[VALUE] knob.
4.
Turn the [VALUE] knob to specify the receive channel (1 – 16).
fig.12-13
MIDI CH
Sets the Basic Channel (MIDI channel on which the VC-1
receives and transmits messages).
Value: 1 – 16
5.
Press the [MENU] button to turn off its illumination.

Selecting Patches with the VALUE knob

1.
Make sure the PATCH TOP screen is displayed. If the PATCH TOP screen is not displayed, press [EXIT]
several times until the PATCH TOP screen appears.
2.
Play the keyboard to hear what the selected patch sounds like. To change to a different patch, turn the
[VALUE] knob.
• At this time you can switch more rapidly by holding down [VALUE] knob while you perform these
operations.
• Use the [
Bank Number)
fig.12-14e
Cursor
] or [ ] buttons to move the cursor to the value you want to edit. (Patch
Cursor
Try Out the Sounds
97