Balance (Chorus Balance)
This sets the volume balance of the chorus of the chorus sound
and normal sound.
Value: 0–100
Partial Parameters
Restriction of the available parameters caused by Structure
Depending on what Structure (p. 57) is used, the available parameters may be different.
1.
Some parameters included in a Partial that uses a PCM sound generator are invalid. The
2.
With Ring Modulation, some parameters in Partial 2 will automatically become the same as
for Partial 1. Therefore, the values shown in the display are irrelevant with the actual values.
The
fig.09-20a(LCD_LTonePartial1)
<FORM>:
<PITCH>:
<TVF>:
<TVA>:
<MOD>:
mark is shown when the parameters apply even for PCM sounds.
mark is shown for such parameters.
(p. 64)
(p. 66)
(p. 68)
(p. 73)
(p. 76)
Value
Balance
100
Only the chorus sound is heard.
Chorus sound = Normal sound
50
0
Only the normal sound is heard.
Tone Parameters
63