Roland V-Card VC-1 Owner's Manual page 119

System
fig.12-45
Master Tune
Adjusts the overall tuning of the VC-1. The display shows the
frequency of the A4 note (center A).
Value: 427 – 452 Hz
fig.12-46
Sound Character
Sets whether the output characteristics of the sound are the same
as those of the D-50 or the VariOS.
Value: D-50, VariOS
fig.12-07
MIDI Mode
Selects the MIDI keyboard routing. Normally, you should set the
MIDI mode to "PC."
Value: PC, Internal
Display
PC
Internal
fig.12-46a
C1/C2/C3 Knob (Knob Switch)
Enables or disables control of the C1/C2/C3 knobs.
Description
When using a USB connection, the MIDI connectors on the rear panel of the VariOS will function as a USB MIDI
interface (Roland VariOS External MIDI).
When USB is not connected (and when your computer is not powered up), the MIDI connectors on the rear panel
of the VariOS are connected directly to the sound generator section.
The MIDI connectors of the rear panel of the VariOS are connected directly to the sound generator section.
Settings for the Entire VC-1
119