Roland V-Card VC-1 Owner's Manual page 43

fig.04-07(LCD_DataTrans_ReverbCopy)
3.
Touch <REVERB COPY> in the left of the screen. The REVERB
COPY screen appears.
4.
Modify the value by either turning the VALUE dial or pressing
[INC/+] or [DEC/-].
Source Bank
Selects the source Patch Bank of Reverb Type.
Value: P1 – P6, I1 – I8
No.
Selects the source Reverb Type.
Value:1 – 32
Destination Bank
Selects the destination Patch Bank of Reverb Type.
Value: I1 – I8
No.
Selects the destination Reverb Type.
Value: 17 – 32
5.
Touch <OK>. The display will ask "Are You Sure?", then touch <Execute> to execute the Reverb Copy
operation. If you want to cancel without executing, touch <Cancel>.
When the reverb copy is completed, the display shows "Complete."
Transferring Patches To and From the D-50/550
43