Applying Effects to the Sound
The performance controlling functions (we call them factors in this manual) in each Patch can be edited
by taking the following procedure.
A patch consists of several Factors as show below.
fig.05-01e
Key Mode
Applying Effects by Turning Knobs
By turning the [C1], [C2] and [C3] knobs while you play, you can control the various functions that've
been assigned to them.
* How each Control Function actually affects the sound differs depending on the individual patch. Some Patches may
not be affected at all.
Display
C1 (PITCH)
C2 (TIME)
C3 (FORMANT)
98
Tone Tune
UPPER Tone
Variations of
Tone
Control Functions
Balance
LOWER Tone
Tone Tune
Description
The volume balance of the Upper and the Lower Tone can be change.
This sets the volume of the reverb and direct sounds.
This sets the portamento time from one note to another. If Portament Switch (p. 99) is set to OFF,
C3 knob may have no effect.
Output Mode
(Reverb, etc.)