Settings For The Entire Vc-1; How To Make The System Function Settings - Roland V-Card VC-1 Owner's Manual

Settings for the Entire VC-1

Settings that affect the entire operating environment of the VC-1, such as tuning and MIDI message
reception, are referred to as System functions. This section explains how to make settings for the System
functions and describes the functions of the different System parameters.

How to Make the System Function Settings

fig.12-39
1.
Press the [MENU] button so it's lighted, and access the MENU
screen.
2.
Turn the [VALUE] knob to select "MIDI Settings" or "System,"
and press the [VALUE] knob.
3.
Turn the [VALUE] knob to select the factor that you want to edit,
and press the [VALUE] knob.
4.
Turn the [VALUE] knob to specify the value.
5.
Repeat steps 2 – 4 to set system settings.
6.
After you have edited the settings of the System function, perform the Save operation (p. 120).
* Changes you make to the System function settings are only temporary – -they will be discarded as soon as the power
is turned off. If you want to keep any changes you've made in the system settings, you must save them in VC-1.
MIDI
fig.12-13
MIDI CH (MIDI Channel)
Sets the Basic Channel (MIDI channel on which the VC-1
receives and transmits messages).
Value: 1 – 16
fig.12-40
Control
Determines how to receive messages from an external MIDI
device. ("Key Mode Alteration" (p. 126))
Value: Basic CH, Global CH, Mode Message OFF
117