Saving Patches - Roland V-Card VC-1 Owner's Manual

Creating Patches

Saving Patches

Changes you make to sound settings are temporary, and will be lost if you turn off the power or select
another sound. If you keep the modified sound, you must save it in the VC-1 (PATCH WRITE).
When you perform the save procedure, the data that previously occupied the save destination will be lost.
However, the factory setting data can be recovered by performing the Factory Reset. ("Reset to Default
Factory Settings" (p. 115))
* Never insert or remove the VC-1 while the VariOS is turned on. Patches cannot be saved to PC cards other than the
VC-1.
1.
Make sure that the patch that you want to save is selected.
fig.12-33
2.
Press the [MENU] button so it's lighted, and access the MENU
screen.
3.
Turn the [VALUE] knob to select "Patch Write," and press the
[VALUE] knob.
fig.12-35e
4.
Turn the [VALUE] knob to specify the save-destination patch.
fig.12-35a
5.
Press the [VALUE] knob, and the display will ask "Are You Sure?"
Press [VALUE] knob once again to carry out the patch save
operation.
114
Cursor