Roland V-Card VC-1 Owner's Manual page 67

WG Mod (WG Modulation)
fig.09-27z(LCD_PitchWfMod)
LFO (LFO Mode)
fig.09-28e(LFO_Mode)
Selects one of the following four vibrato modes.
Value: OFF, (+), (-), A&L
Display Description
OFF No vibrato is obtained.
(+) Vibrato is on.
(-) Vibrato is on but inverted.
Vibrato can be obtained only by Aftertouch
A&L
and Bender Lever.
ENV (P-ENV Mode)
fig.09-29e(P-ENV_Mode)
Selects one of the following three modes, determining how the
pitch is controlled by P-ENV.
Value: OFF, (+), (-)
Display Description
OFF No alteration.
(+) Pitch changes with the set P-ENV curve.
(-) Pitch changes with the P-ENV curve inverted.
Bend (Bender Mode)
Selects how the pitch is controlled by the bender lever as follows.
Value: OFF, KEY, NOM
Display Description
No pitch alteration by moving the lever right or the left.
OFF
KF Pitch changes within the Bender range, set in Patch Factors, plus Keyfollow (Pitch) of WG.
Pitch changes within the Bender range, set in Patch Factors.
NOM
Tone Parameters
Normal
"-" is selected.
"+" is selected.
"-" is selected.
67