Connecting to Your Computer via USB
Recovering the System from the CD-ROM
If while running the VC-1 from a computer you happen to delete (format) any of the VC-1's folders or
files or change file or folder names, the VC-1 will fail to operate correctly. In such instances, recover the
VC-1's program from the CD-ROM included with the VC-1.
Use the following procedure.
Selecting the V-Synth's USB Storage Mode (p. 83)
Connecting the V-Synth to Your Computer via USB (p. 84)
Recovering the System (p. 86)
Canceling the USB Connection (p. 86)
Selecting the V-Synth's USB Storage Mode
fig.11-01(ModeMenuSystem)
1.
Turn off the power of VC-1 (V-Synth) once, then pull out the VC-1
from the PC CARD slot.
2.
Turn on the power of V-Synth again. Wait for the V-Synth to start
up normally.
3.
Press [MODE] to access the V-Synth MODE MENU window.
4.
Touch <SYSTEM>. The SYSTEM Com Master screen appears.
fig.11-02(SystemGeneral)
5.
In the left side of the screen, touch the <MIDI USB> tab. The
SYSTEM Com MIDI/USB screen appears.
6.
Touch <USB Setup>. The SYSTEM Com USB Setting window
appears.
83