Try Out the Sounds
Viewing Various Information
1.
In the upper right of the screen, touch <
2.
In the pulldown menu, touch <INFO>. The Information window appears.
fig.08-13
3.
This window shows the following information.
Ver.:
4.
When you have finished viewing the information, press [EXIT] to close the window.
Enabling or Disabling the Beep Tone
You can specify whether or not a beep tone will be heard when you touch a valid point on the touch
screen. At the factory setting, the beep tone will be sounded.
fig.03-07
1.
In the upper right of the screen, touch <
appears.
2.
In the pulldown menu, touch <Beep> to add a check mark (✔).
With this setting, the beep tone will be heard. If you perform the
same procedure once again, the check mark will be cleared and the
beep tone will no longer be heard.
18
The VC-1's program version
>. A pulldown menu appears.
>. A pulldown menu