Roland V-Card VC-1 Owner's Manual page 85

fig.11-06(Connect)
8.
Touch <PC Card> to establish the connection with your
computer.
When the USB connection is established for first time, the driver
installation will begin. A dialog box of "Found new hardware"
will appear near the Windows task tray. Installation is completely
automatic. Please wait for it to be completed.
9.
When installation is completed, open My Computer and you will
see a new drive icon.
OS
Windows 98/Me/2000
Windows XP
Once the V-Synth is connected, you can recover system files by operating your computer. (p. 86)
Macintosh
fig.11-05(ModeMenuUsb)
1.
Make sure that the power of the V-Synth is turned off.
2.
Start up your computer.
3.
Connect the V-Synth and your computer using a USB cable.
4.
Turn on the power of V-Synth.
5.
Insert the VC-1 into the PC CARD slot of the V-Synth rear panel.
6.
Press [MODE] to access the V-Synth MODE MENU window.
7.
Touch <USB>. The USB Storage screen appears.
fig.11-06(Connect)
8.
Touch <PC Card> to establish the connection with your
computer.
9.
When the USB connection is established, a new drive icon will
appear on your desktop.
Once the V-Synth is connected, you can recover system files by operating your computer. (p. 86)
Icon name
Removable Disk
VC-1
Connecting to Your Computer via USB
85