Function Display - Icom IC-F5062 Instruction Manual

■ Function display

q w e r
I c o m I n c .
q SIGNAL STRENGTH INDICATOR
Indicates relative signal strength level as below.
Weak Receive Signal level
w LOW POWER INDICATOR
Appears when low output power is selected.
e AUDIBLE INDICATOR
➥ Appears when the channel is in the 'audible' (unmute)
condition.
➥ Appears when the specified 2/5-tone/BIIS*
code is received.
r COMPANDER INDICATOR
Appears when the compander function is activated.
t SCRAMBLER INDICATOR
Appears when the voice scrambler function is activated.
y BELL INDICATOR
Appears/blinks when the specific 2/5-tone/BIIS*
code is received, according to the pre-programming.
t y u i o
!0
!1
Strong
1
/MDC*
1
/MDC*
u CALL CODE MEMORY INDICATOR
➥ Appears when the call code memory is selected.
➥ Appears when a phone call is received.*
i SCROLL INDICATOR
Appears when the SDM, includes more than 12 charac-
ters, is selected during the received message selection
1
mode* .
o SDM INDICATOR
Appears when an SDM is received, or an SDM is se-
lected for transmission.*
!0 ALPHANUMERIC DISPLAY
➥ Displays an operating channel number, channel name,
Set mode contents, DTMF code, etc.
➥ The indication mode can be selected from 1 line or 2
lines. Ask your dealer for details.
• In this instruction manual, the LCD illustration is described
using the 2 lines indication mode.
!1 ACTIVATED KEY INDICATOR
2
Appears above the key assigned as [Scan A Star t/
Stop], [Scan B Start/Stop], [Scan Add/Del(Tag)], [Lock],
[Talk Around], [Surveillance] and [BIIS button]*
ing that key is activated.
1
* BIIS operation only
3 ®
* LTR operation only
See the operating guide for details of BIIS, MDC and LTR
2
system operations. Ask your dealer for details.
PANEL DESCRIPTION
3
1
1
keys dur-
2
* MDC operation only
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
®
2