Recording A Received Audio (Short Rec); D One-Touch Recording; Playing Back The Recorded Audio (Short Rec); D Basic Playing - Icom IC-7800 Instruction Manual

■ Recording a received audio (Short REC)

D One-touch recording

■ Playing back the recorded audio (Short REC)

D Basic playing

[F-1•Y] [F-2•Z] [F-3•PLAY]
Appear
[REC]
Counts down
VOICE RECORDER FUNCTIONS
Up to 20 channels of receive voice memories are
available in the IC-7800. And the total audio length
of up to 209 seconds can be recorded in receive
channels. However, the maximum recordable length
into a single channel is 30 seconds.
This Voice Recorder records not only the received
audio, but also the information such as set operating
frequency, mode, and the recording time for your fu-
ture reference.
➥ Push [REC] momentarily to records the previous 15
seconds audio.
• The recordable time period can be set in voice set mode.
(p. 7-13)
• The operating frequency, mode and current time are au-
tomatically programmed as the memory names.
NOTE: When transmit (or [PTT] is pushed) within
the set period, no audio will be recorded.
IMPORTANT!
When you record the 21st audio segment, or when
the total audio length exceeds 209 seconds, the old-
est recorded audio is automatically erased to make
room for the new audio.
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Push [F-2•VOICE] to display the Voice Recorder
menu.
e Push [F-1•PLAY] to call up the Voice Recorder
screen.
• Previously selected screen, TX or RX memory, is dis-
played. If the TX memory channel (T1–T4) appears,
push [F-7•T/R] to select RX memory channel.
r Push [F-1•Y] or [F-2•Z] to select the desired voice
memory to playback.
t Push [F-3•PLAY] to start playback.
• "
" indicators appear and the timer counts down.
y Push [F-3•PLAY] again to stop playback if desired.
• Playback is terminated automatically when all of the re-
corded contents in the channel are played.
u Push [EXIT/SET] twice to exit the Voice Recorder
screen.
7-7
7