Recording A Received Audio; D Basic Recording; D One-Touch Recording - Icom IC-7700 Instruction Manual

■ Recording a received audio

D Basic recording

VOICE
F-2

D One-touch recording

REC EXIT/SET
T/R
F-7
REC
VOICE RECORDER FUNCTIONS
Up to 20 receive voice memories are available in the
IC-7700. A total of 209 sec. of audio can be recorded
in receive messages. However, the maximum
recordable length of a single message is 30 sec.
This voice recorder records not only the received
audio, but also the information such as set operating
frequency, mode, and the recording time for your fu-
ture reference.
q Push
EXIT/SET
tion screen, if necessary.
w Select the desired mode.
e Push [VOICE]
screen.
• Previously selected screen, TX or RX memory, is dis-
played. If the TX memory channel (T1–T4) appears,
push [T/R]
F-7
r Push and hold
• The operating frequency, mode and current time are
programmed as the memory names automatically.
t Push momentarily to stop recording.
REC
IMPORTANT!
Push REC to stop recording before, or when
30 sec. has elapsed from the start of recording.
The voice recorder memory records 30 sec.
(max.) of audio before
For example, when recording 40 sec. of audio,
the first 10 sec. audio will be over-written with the
last 10 sec., so that the total of audio recorded is
only 30 sec.
When you record the 21st audio message, or
when the total audio length exceeds 209 sec.,
the oldest recorded audio is automatically erased
to make room for the new audio.
y Push
EXIT/SET
screen.
NOTE: When transmit (or [PTT] is pushed) while
recording, no audio will be recorded.
To record the received signal immediately, one-touch
voice recording is available.
➥ Push REC momentarily to store the previous
15 sec. audio.
• The recordable time period can be set in voice set
mode. (p. 7-9)
7-3
several times to close a multi-func-
F-2 to call up the voice recorder
to select RX memory channel.
REC for 1 sec. to start recording.
REC is pushed.
twice to exit the voice recorder
7