Summit X250e-24t Switch
The front panel of the Summit X250e-24t switch
Twenty-four fixed autosensing 10/100BASE-T ports (ports 1–24) that provide 2.4 Gbps of
●
high-density copper connectivity
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extre me Ne two rks Plugga ble Inte rfa ce Mo dule s Ins ta lla tio n Guide .
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
page
34.
Stack number indicator showing the position of this switch in a stacked configuration.
●
Serial console port used to connect a terminal and perform local management.
●
Figure 7: Summit X250e-24t Switch Front Panel
Stack
1
2
Stack number indicator
The rear panel of the Summit X250e-24t switch
Management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for optional connection to the EPS-160 External Power Module.
●
See
"EPS-160 External Power Module (with EPS-T)" on page 75
connecting redundant power supply cable is shipped with the EPS-160 unit.
AC power input socket.
●
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 8: Summit X250e-24t Switch Rear Panel
Management port
10 Gigabit
stacking ports
Summit Family Switches Hardware Installation Guide
(Figure
10/100 Mbps ports
(Figure
External power
supply connection
Redundant Power Input
! See Manual
Power socket
7) includes:
"Combination Ports and Failover" on page
"Summit X250e Series Switch LEDs" on
Console
port
Combination ports
SH_038B
8) includes:
for more information. The
SH 039
16.
23