Summit X250e-24t Switch
The front panel of the Summit X250e-24t switch
Twenty-four fixed autosensing 10/100BASE-T ports (ports 1–24) that provide 2.4 Gbps of
●
high-density copper connectivity
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page
42.
Stack number indicator showing the position of this switch in a stacked configuration
●
Serial console port used to connect a terminal and perform local management
●
Figure 7: Summit X250e-24t Switch Front Panel
Stack
1
2
Stack number indicator
The rear panel of the Summit X250e-24t switch
Ethernet management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for optional connection to the EPS-160 External Power Module
●
The connecting redundant power supply cable is shipped with the EPS-160 unit. See
External Power Module (with EPS-T)" on page 122
AC power input socket
●
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 8: Summit X250e-24t Switch Rear Panel
Management port
10 Gigabit
stacking ports
Summit Family Switches Hardware Installation Guide
(Figure
10/100 Mbps ports
(Figure
External power
supply connection
Redundant Power Input
! See Manual
Power socket
Summit X250e Series Switches
7) includes:
"Combination Ports and Failover" on page
"Summit X250e Series Switch LEDs" on
Console
port
Combination ports
SH_038B
8) includes:
for more information.
22.
"EPS-160
29