Remove The Screws Holding The Front Mounting Brackets To The Sides Of The Switch, And Set The Mounting Brackets Aside; Support The Front And Back Of The Switch As You Slide The Switch Back, Off The Rear Mounting Brackets, And Out Of The Rack (Figure 120) - Extreme Networks Summit X150 Series Hardware Installation Manual

Figure 143: Removing the Front Mounting Screws from a Two-Post Rack
4 Remove the screws holding the front mounting brackets to the sides of the switch, and set the
mounting brackets aside.
5 Support the front and back of the switch as you slide the switch back, off the rear mounting
brackets, and out of the rack
Set the switch on a secure work surface.
Figure 144: Removing the Switch from a Two-Post Rack
Summit Family Switches Hardware Installation Guide
(Figure 144).
SH_100
SH_101
167