Extreme Networks Summit X150 Series Hardware Installation Manual page 130

Installing Summit Family Switches
5 At the front of the switch, place a front mounting bracket against each side of the switch, in front of
the ventilation openings in the side of the switch
Figure 100: Positioning the Front Mounting Brackets
6 Using the provided screws, attach each front bracket to the switch
7 Slide the switch back in the rack until the front mounting brackets are against the front of the rack
post (Figure
Figure 101: Securing the Front Mounting Brackets to the Rack
8 Using mounting screws suitable for your equipment rack, secure the mounting brackets to the front
of the rack post.
After the switch is secured to the rack, install and connect as described on
supplies or on
130
101).
page 136 for DC power supplies.
(Figure 100)
SH_129
(Figure
SH_130
Summit Family Switches Hardware Installation Guide
100).
page 135 for AC power