Connecting Network Interface Cables - Extreme Networks Summit X150 Series Hardware Installation Manual

Figure 146: Removing the Switch from a Cabinet
6 Set the switch on a secure work surface. Using a #1 Phillips screwdriver, remove the front mounting
brackets from the sides of the switch.
7 Remove the rear mounting brackets from the rear rack posts.

Connecting Network Interface Cables

Use the appropriate type of cable to connect the ports of your switch to another switch or router. For
connections to the 10GBASE-T ports on the Summit X650-24t switch, see
distances.
Table 26: Cable Distances for 10GBASE-T Ports
Cable Type Maximum Distance
CAT5E 55 meters
CAT6 55 meters
CAT6A 100 meters
Summit Family Switches Hardware Installation Guide
SH_104
Table 26 for cable types and
169