Extreme Networks Summit X150 Series Hardware Installation Manual page 110

Building a SummitStack Configuration
To connect a SummitStack 128G cable:
1 Holding the cable connector with the release tab on top, align the connector with the stacking port
on the VIM1 module in the Summit X650 series switch
Figure 80: Connecting a SummitStack 128G Cable
2 Firmly press the cable connector into the stacking port until the spring latch on top of the connector
clicks into place.
3 Repeat steps
110
SH_121
1 and 2 to connect the other end of the cable.
(Figure 80).
Summit Family Switches Hardware Installation Guide