Extreme Networks Summit X150 Series Hardware Installation Manual page 116

Building a SummitStack Configuration
To connect a SummitStack 64G cable:
1 Holding the cable connector with the release tab on top, align the connector with the stacking port
on the VIM2 module in the Summit X480 series switch
Figure 88: Connecting a SummitStack 64G Cable
2 Firmly press the cable connector into the stacking port until the spring latch on top of the connector
clicks into place.
3 Repeat steps 1 and 2 to connect the other end of the cable.
116
(Figure
SH_164
Summit Family Switches Hardware Installation Guide
88).