External Power Module (With Eps-T); Eps-Ld External Power Supply Unit - Extreme Networks Summit X150 Series Hardware Installation Manual

EPS-160 External Power Module (with EPS-T)
The EPS-160 External Power Module (Model 10907) is a modular power supply for use with the EPS-T
chassis. You can use the EPS-160 as a redundant power supply with the following Extreme Networks
switches:
Summit X150-24t switch
●
Summit X150-24x switch
●
Summit X150-48t switch
●
Summit X250e-24t switch
●
Summit X250e-24x switch
●
Summit X250e-48t switch
●
Summit X450-24t switch
●
Summit X450-24x switch
●
The EPS-T is a rack-mountable chassis or tray that holds one or two EPS-160 power supplies. Each EPS-
160 power supply provides one-to-one redundancy for an attached Extreme Networks switch.
You can order the EPS-T chassis with one or two EPS-160 power supplies already installed. You can also
order an additional power supply from your Extreme Networks reseller.
NOTE
Each EPS-160 power supply is shipped with a special redundant power supply cord
cord is not provided; you can order an appropriate cord from Extreme Networks or from your local supplier. The
power cord must meet the requirements listed in
Figure 64: Redundant Power Cord Connector

EPS-LD External Power Supply Unit

You can use the Extreme Networks EPS-LD External Power Supply Unit (Model 45019) as a redundant
power supply with the following Extreme Networks switches:
Summit X450a-24t switch
●
Summit X450e-24p switch
●
When attached to the Summit X450e-24p, the EPS-LD provides 465 W total power with 375 W dedicated
for PoE applications.
Summit Family Switches Hardware Installation Guide
"Selecting Power Supply Cords" on page
ES4K027
)
(Figure 64 . An AC power input
218.
75