Extreme Networks Summit X150 Series Hardware Installation Manual page 129

3 From the back of the equipment rack, slide the switch into place over the mounting brackets (see
Figure 98). Make sure the brackets slide between the support pegs on both sides of the switch.
Figure 98: Sliding the Switch onto the Rear Mounting Brackets
4 Push the switch forward as far as it will go, until the bracket support pegs are against the T of the
mounting bracket (Figure
Securely tighten the rack mounting screws.
Figure 99: Fastening the Rear Mounting Brackets
Summit Family Switches Hardware Installation Guide
99).
SH_126
SH_128
129