Installing The Switch In A Cabinet Or Four-Post Rack - Extreme Networks Summit X150 Series Hardware Installation Manual

Installing Summit Family Switches
After the switch is secured to the rack, install and connect power supplies as described in
Summit X650 AC Power Supply" on page 157
page 158.

Installing the Switch in a Cabinet or Four-Post Rack

To install the switch in a cabinet or four-post rack:
1 At the back of the cabinet, attach a rear mounting bracket to each rear post, as shown in
Figure 129: Attaching Rear Mounting Brackets—Cabinet Installation
2 Attach an ESD-preventive wrist strap to your wrist and connect the metal end to an appropriate
ground point on the rack.
3 Set the switch on a secure work surface.
4 At the front of the switch, attach a rack-mounting bracket to each side
Position the bracket with the flange at the front edge of the switch.
154
or "Installing a Summit X650 DC Power Supply" on
SH_102
Summit Family Switches Hardware Installation Guide
"Installing a
Figure 129
(Figure 130).