Summit X150-48t Switch
The front panel of the Summit X150-48t switch
Forty-eight fixed autosensing 10/100BASE-T ports (ports 1–48) that provide 4.8 Gbps of high-density
●
copper connectivity
Two combination ports (ports 49–50) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page
26.
Serial console port used to connect a terminal and perform local management
●
Figure 5: Summit X150-48t Switch Front Panel
The rear panel of the Summit X150-48t switch
Management port with associated LEDs
●
Redundant power input connector for optional connection to the EPS-160 External Power Module
●
The connecting redundant power supply cable is shipped with the EPS-160 unit. See
External Power Module (with EPS-T)" on page 92
AC power input socket
●
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 6: Summit X150-48t Switch Rear Panel
Management port
Summit Family Switches Hardware Installation Guide
(Figure
10/100 Mbps ports
(Figure
for more information.
External power
supply connection
Power socket
5) includes:
"Combination Ports and Failover" on page
"Summit X150 Series Switch LEDs" on
Console
port
Combination ports
SH_054A
6) includes:
21.
"EPS-160
SH_055
25