Sony Handycam DCR-PC5 Operating Instructions Manual page 99

Using a "Memory Stick'-introduction
Your camcorder has operation buttons on the LCD screen. Press the LCD panel directly
to operate each fimction.
(1) Set tile POWER switch to MEMORY. Make sure that the LOCK is set to the
right (unlock) position.
(2) Press OPEN to open tile LCD panel. Operation buttons appear on the LCD
screen. You call switch the memory playback/the memory camera mode by
pressing PLAY/CAM. You can also use the Remote Comlnander for this
operation.
(3) Press FN. Operation buttons appear on tile LCD screen.
(4) Press PAGE2 to go to PAGE2. Operation buttons appear on the LCD screen.
(5) Press PAGE3 to go to PAGE3. Operation buttons appear on the LCD screen.
(6) Press a desired operation item.
Re%r to relevant pages for each f_mctiotl.
3-6
In the memory camera
nlode
÷
÷
)
In the memory In the memory
camera mode playback mode
LOCK
3
q
g
0
o
99