Sony Handycam DCR-PC5 Operating Instructions Manual page 68

Dubbing only desired scenes - Digital program editing
If you connect using the LLINK cable (DV connecting cable)
With digital to digital connection, video and audio signals are transmitted in digital
fbrm for high quality editing.
When you connect with the LLINK cable (DV connecting cable)
You Irlay not be able to operate the dubbing flmction correctly, depending on the VCR.
Keep the i.LINK connection, and follow the procedure fl'om step 2 on page 61.
(1) Insert the tape for playback into your camcorder, and insert a tape for
recording into the VCR.
(2) Press FN to display PAGE1 (p. 16).
(3) Select VIDEO EDIT in _ in the menu settings (p. 89).
Then press EXEC.
(4) Search for the beginning of the first scene you want to insert using the video
operation buttons, then pause playback (p. 29).
(5) Press MARK IN on the LCD screen or MARK button on the Remote
Conli_lander.
The IN point of tlle first program is set, and the top part of the program mark
changes to light blue.
(6) Search for the end of the first scene you want to insert using the video
operation buttons, then pause playback (p. 29).
(7) Press MARK OUT on the LCD screen or MARK button oil the Reinote
Commander.
The OUT point of tlle first program is set, then the bottom part of the program
mark changes to light blue.
(8) Repeat steps 4 to 7.
When one program is set, the program mark changes to light blue.
You can set 20 programs in maxinmm.
5-8
68