Sony Handycam DCR-PC5 Operating Instructions Manual page 65

Dubbing only desired scenes - Digital program editing
When you connect using the i.LINK cable (DV connecting cable) (not supi_lied ), follow
the procedures below.
(1) Set the POWER switch to VCR on your camcorder.
(2) Turn the power of the connected VCR on, then set the input selector to DV
input.
When you connect a digital video camera recorder, set its POWER switch to
VCR/VTR.
(3) Press FN to display PAGE1 (p. 16).
(4) Select EDIT SET in @, then press EXEC (p. 89).
(5) Select CONTROL, then press EXEC.
(6) Select i.LINK, then press EXEC.
4 5,6
I
COMMANDER
'_t DISPLAY
VIDEO EDIT
EDIT SET
5'
65