Sony Handycam DCR-PC5 Operating Instructions Manual page 14

Step 1 Preparing the power supply
When you use yore camcorder for a long time, we reconm-lend that you power it flora a
wall outlet using tile AC adaptor.
(1) Connect the supplied connecting cord to the DC OUT jack on the AC adaptor.
(2) Slide the connecting plate ill tile direction of the arrow.
(3) Connect the power cord to the AC adaptor.
(4) Connect tile power cord to a wall outlet.
3
4
To remove the connecting plate
The connecting plate is removed in tile same way as tile battery pack.
WARNING
The power cord n-lust only he changed at a qualified service shop.
PRECAUTION
The set is not disconnected from tile AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.
Using a car battery
Use Sony DC Adaptor/Charger (not supplied).
14