Sony Handycam DCR-PC5 Operating Instructions Manual page 50

Playing back a tape with digital effects
During playback, you can process a scene using the digital effect functions: STILL,
FLASH, LUMI. and TRAIL.
(1) In tile playback/playback
pause mode, press FN and select PAGE2 (p. 16).
(2) Press DIG EFFT. The screen to select a desired digital eflect mode appears.
(3) Select a desired digital eflbct mode. Ill the STILL or LUMI. mode, the picture
where you select tile mode is stored in memot T as a still picture.
(4) Press /+ to adjust tile eff>ct. Refer to page 41 for details.
(5) Press _ OK to return to PAGE2.
1 2,3
DIG D_FT [_
EFFT
_IIT_ALI
To return to FN
Press EXIT.
To cancel the digital effect function
Press _ OFF to return to PAGE2.
Notes
• You cannot process externally input scenes using the digital effect t\mction.
• To record pictures that you have processed using the digital effect, record the pictmes
on the VCR using your camcorder as a player.
Pictures processed by the digital effect function
Pictures processed by the digital effect f\mction are not output thlough the _ DV IN/
OUT jack.
When you set the POWER switch to OFF or stop playing back
The digital effect f\mction is automatically canceled.
5O