Step 1 Preparing
the power
supply
To remove
the
battery
pack
Tile battery
pack is removed
in the same way as the battery
terminal
cover.
After installing
the battery pack
Do not carry your comcorder
by holding
the battery
pack. If you do so, the battery
pack
may slide off your camcorder
nnintentionally,
damaging
your camcorder.
Note on the remaining
battery
time indicator
The remaining
battery
time indicator
on the LCD screen or in the viewfinder
roughly
indicates
the recording
time. The indicator
may not be correct,
depending
on the
conditions
in which you are recording.
When you close the LCD panel and open it
again, it takes about
1 minute
fbr the correct
remaining
battery
time to be displayed.
Note on the battery terminal
cover
To protect
the battery
terminals,
install the battery
terminal
cover after the battery
pack
iS
l'eIlloved.
13