Sony Handycam DCR-PC5 Operating Instructions Manual page 87

Labeling a cassette
If you use a tape witb cassette memory, you can label a cassette. The label can
consist of up to 10 chalacters and is stored in cassette memory. When you insert
tile labeled cassette and set tile POWER switch to CAMERA or VCR, tile label is
displayed flor about 5 seconds.
(1) Insert the cassette you want to label.
(2) Set the POWER switch to CAMERA or VCR.
(3) Press FN to display PAGE1 (p. 16).
(4) Press MENU to display the menu.
(5) Select _ with ,l/T, and then EXEC.
(6) Select TAPE TITLE, then press EXEC. The screen to enter the label appears.
(7) Select a desired character. Repeat pressing a key to select the desired character
on the key.
(8) Press ÷ to move the cursor for the next character. Repeat the same procedure
as step 7 and 8 to complete the label.
(9) Press SET. The label is stored in memory.
5,6 'o%_I°;E_C_ _'
't_ TITLEERASE
TITLE DSPL
m7 h
_w ERASE ALL I '_
F_q _1__
L
7,8
[]
5'
¢Q
87