Sony Handycam DCR-PC5 Operating Instructions Manual page 17

Step 3 Using a touch panel
Notes
• When nsing the tonch panel, press operation buttons with your thnmb supporting tile
LCD screen from the back side of it o1"press those buttons lightly with yore index
finger. Do not press them with sharp pointed olojects snch as pens.
• Do not press the LCD screen too hard. ¢_
• Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. Yon
can control the display with DISPLAY/TOUCH PANEL on your camcorder.
• When operation bnttons do not work even if yon press them, an adjtlstment is
required (CALIBRATION) (p. 141). _"
• When the LCD screen gets dirty, use the supplied cleanig cloth.
When executing each item
The green bar appears above the item.
If the items are not available
The color of the items changes to gray.
Touch panel
Yon can operate with the touch panel using the viewfinder (p. 124).
Press FN to display the following buttons:
In CAMERA mode
PAGE1 MENU, END SEARCH, FADER, DIGITAL EFFECT, MEMORY MIX,
EXPOSURE
PAGE2 TITLE, LCD BRIGHT, VOLUME
PAGE3 SELFTIMER
In VCR mode
PAGE1 MENU, LCD BRIGHT, VOLUME, END SEARCH
PAGE2 TITLE, DIGITAL EFFECT, PB ZOOM
PAGE3 DATA CODE, REC CONTROL
See p. 99 for MEMORY mode.
17